Paper and Fiber Arts: Stacked Stencils for Clean and Simple Cards

Have you layered stand-alone stencils to achieve a new look? That is what today's post is about. I used two stencils to create a different effect on three clean and simple cards. The idea is from Nicole Watt in her Altenew Academy class titled "Advanced Stencil Techniques". Her class is filled with a lot of fun techniques. This one particularly appeals to me because it looks great and is very fun to do. Also, I love that there is a bit of a surprise element to what you create that is shown upon the reveal.

On the first two cards, I used the grid stencil after using an open stencil or mask for the first layer. The card pictured above is the maze stencil with Silver Sage ink blended onto a 4.25" x 5.5" piece of cardstock. Leaving the stencil in place, the grid stencil is aligned on top, and Pool and Navy inks are blended over the original design. The photo above shows the ink blending after that step with the grid stencil removed.

Clean and Simple Card with Stacked Stenciling

These next two cards use a reverse mask from the Wonderland set. The one above shows it with the grid stencil and the one below is with a discontinued geometric stencil. Also, the one below uses navy ink after the geometric design was complete. Each of the cards has a stamped sentiment from the Wonderland stamp set.

All three cards are layered onto standard 4.25" x 5.5" card bases after die-cutting the stencil background and a frame using Gina K's Master Cuts Set 1 dies. A little bling was added to all of the cards using Pinkfresh Studio Metallic Pearls or Essential Jewels.

The large die-cut sentiment is popped up with foam tape. It covers some of the card, but not enough to be distracting from the cool-looking background. I hope you give this technique a try! It is kind of addictive, though.